-40%

11 GPM 2 Spool Hydraulic Monoblock Double Acting Control Valve SAE Ports

$ 41.79

Availability: 87 in stock
  • Maximum Flow Rate: 11 gpm
  • Brand: ALL-CARB
  • Maximum Pressure: 3625 psi
  • Modification Description: No
  • Condition: New
  • Spool Count: 2-Spool
  • Warranty: 1 year
  • Type: Hydraulic controller
  • Valve Operation: Manual
  • Surface Finish: Standard
  • Modified Item: No

    Description

    This monoblock valve is a hydraulic directional control valve. These valves are used to start and stop fluid flow into hydraulic cylinders or hydraulic motors.
    Common Uses:
    Operate hydraulic cylinders (Double-Acting or Single-Acting)
    Operate hydraulic motors ("D" Spool Required)
    Install rear remotes on a tractor
    Benefits:
    11 GPM 2 Spool Hydraulic Monoblock Double Acting Control Valve SAE Ports
    This monoblock valve is a hydraulic directional control valve. These valves are used to start and stop fluid flow into hydraulic cylinders or hydraulic motors.
    Common Uses:
    Operate hydraulic cylinders (Double-Acting or Single-Acting)
    Operate hydraulic motors ("D" Spool Required)
    Install rear remotes on a tractor
    Benefits:
    2 Spool valve with compact design allows for installations in tight areas
    All spools are standard double acting with spring return to neutral position which are ideal for double acting cylinders
    Used for open center systems (Pump to Tank Flow) - closed center option available
    Anti-drop load checks on each spool
    Precision ground and hard chrome-plated spools assure a long life
    High-tensile strength cast iron monoblock construction
    SAE O-Ring ports ensure solid seal and prevent blockages
    Capable of Closed Center or Power Beyond (conversion plug required)
    Vertical or horizontal handle mount
    Adjustable Relief Valve Range:  1500 to 3625 PSI
    Used as motor or single-acting spool possible (#8 SAE port plug required)
    Features:
    Max Operating Pressure: P = 3625 PSI, T = 725 PSI, A & B = 4350 PSI
    Flow Rating: 11 GPM (40 l/min)
    A & B Work Ports:  #8 SAE O-Ring (3/4”-16) Thread
    Inlet Port: #10 SAE O-Ring (7/8”-14) Thread
    Outlet Port: #10 SAE O-Ring (7/8”-14) Thread
    2 – 5/16” Mounting Holes
    Item Specifics
    Brand
    ALL-CARB
    MPN
    Does Not Apply
    Warranty
    1 year
    Maximum Flow Rate
    11 gpm
    Maximum Pressure
    3625 psi
    Valve Operation
    Manual
    Spool Count
    2-Spool
    Surface Finish
    Standard
    Modified Item
    No
    Modification Description
    No
    Type
    Hydraulic controller
    Payment
    We accept Paypal.
    Shipping
    Please contact us if you have special requirements (combination of packaging etc.).
    We offer free USPS First Class Package as default.
    Returns
    Buyer is responsible for the return cost.
    We will closely examine the condition of the returned items and will not issue any refund/exchange before we make sure the items are in their original neat conditions.
    Contact Us
    Before leaving us neutral or negative feedback, please contact us first. We will do everything we can to give you a satisfying solution.
    Please don't open case via ebay or paypal.
    Please don't open any return request before contact us.
    We do our best to resolve any issue. Leaving negative feedbacks and low ratings doesn't get things solved. So please talk with us and we will not let you down.
    Hot Item
    For Briggs & Stratton V-Twin 20HP 21HP 22HP 23HP 24HP 25HP Carburetor Set 699709
    USD 30.29
    499158 Carburetor Fit For Briggs & Stratton 699831 694941 Lawn Mower Tractor
    USD 17.57
    Front Mount Distributor For Ford 2N 8N 9N 9N12100 New
    USD 52.22
    Go kart Parts Centrifugal Clutch 3/4" Top and End Bore Belts Drive
    USD 31.82
    Fit For Briggs & Stratton 5HP 498298 495426 692784 495951 Carburetor W/Gasket
    USD 20.95
    New List Item
    9 Matched Pair 1/8" Wavy Parallel Set Hardened Stainless Steel 0.0002"
    USD 33.85
    Hydraulic Wire Crimper 12 Ton Battery Lug Terminal Cable Crimping Tool 8 Dies
    USD 43.94
    9 Pcs 1/2" Boring Bar Set Pro Quality Carbide Tipped Bars 1/2" Shank Lathe Tool
    USD 23.02
    For Paint Rust Quick Change 5 Pack 2" Roloc Easy Strip & Clean Discs
    USD 7.53
    For HAAS TOSHIBA CAT40 45°0.589" Pull Stud Retention Knob 10Pcs
    USD 27.84
    11 GPM 2 Spool Hydraulic Monoblock Double Acting Control Valve SAE Ports
    This monoblock valve is a hydraulic directional control valve. These valves are used to start and stop fluid flow into hydraulic cylinders or hydraulic motors.
    Common Uses:
    Operate hydraulic cylinders (Double-Acting or Single-Acting)
    Operate hydraulic motors ("D" Spool Required)
    Install rear remotes on a tractor
    Benefits:
    2 Spool valve with compact design allows for installations in tight areas
    All spools are standard double acting with spring return to neutral position which are ideal for double acting cylinders
    Used for open center systems (Pump to Tank Flow) - closed center option available
    Anti-drop load checks on each spool
    Precision ground and hard chrome-plated spools assure a long life
    High-tensile strength cast iron monoblock construction
    SAE O-Ring ports ensure solid seal and prevent blockages
    Capable of Closed Center or Power Beyond (conversion plug required)
    Vertical or horizontal handle mount
    Adjustable Relief Valve Range:  1500 to 3625 PSI
    Used as motor or single-acting spool possible (#8 SAE port plug required)
    Features:
    Max Operating Pressure: P = 3625 PSI, T = 725 PSI, A & B = 4350 PSI
    Flow Rating: 11 GPM (40 l/min)
    A & B Work Ports:  #8 SAE O-Ring (3/4”-16) Thread
    Inlet Port: #10 SAE O-Ring (7/8”-14) Thread
    Outlet Port: #10 SAE O-Ring (7/8”-14) Thread
    2 – 5/16” Mounting Holes
    Item Specifics
    Brand :
    ALL-CARB
    MPN :
    Does Not Apply
    Warranty :
    1 year
    Maximum Flow Rate :
    11 gpm
    Maximum Pressure :
    3625 psi
    Valve Operation :
    Manual
    Spool Count :
    2-Spool
    Surface Finish :
    Standard
    Modified Item :
    No
    Modification Description :
    No
    Type :
    Hydraulic controller
    Payment
    We accept Paypal.
    Shipping
    Please contact us if you have special requirements (combination of packaging etc.).
    We offer free USPS First Class Package as default.
    Returns
    Buyer is responsible for the return cost.
    We will closely examine the condition of the returned items and will not issue any refund/exchange before we make sure the items are in their original neat conditions.
    Contact Us
    Before leaving us neutral or negative feedback, please contact us first. We will do everything we can to give you a satisfying solution.
    Please don't open case via ebay or paypal.
    Please don't open any return request before contact us.
    We do our best to resolve any issue. Leaving negative feedbacks and low ratings doesn't get things solved. So please talk with us and we will not let you down.
    All rights reserved.