150W Hot Heating Knife Cutter with 10cm Blade for Cutting Foam and Sponge Rope

Description

Specification:
Voltage: 110V/220V
Power: 150W
Length of the Wire: 3M
Weight: 590g
Temp.of blade:6-8 seconds heating up 550°C
The maximum shear capacity：100mm
Type:hot knife
DIY Supplies:Electrical
Aliases:hot cutter
Product Description
Description:
This heating cutter is a kind of convenient and practical cutting tool specially for cutting polyester fabrics, such as fiber banner.
The fabric hot cutteris a wonderful tool with good cutting effect.
There is no rough burr after cutting.
The heat cutter tool is power saving and easy to operate.
The temperature cutting blade can go up to 550°C for which rising to 550°C it takes within 6-8 seconds.
Also, the structure is reasonable and comfortable for using. Most customers use this heating banner cutting tool to cut fiber banner or other advertising fabric graphics well.
Notices:
1.Please make sure the tool is used under condition of ventilation.
2.Don’t burn the residuum in the blade, the blade will be crooked.
3.Don’t burn the blade without touching the cutting materials.
4.Don’t touch the blade by hand when heating, and don’t put the
blade near to the inflammable after heating.
5.Handle the blade after cooling to avoid scalding.
6.Make sure the suitable output power and cutting speed,
overheating will burn out the blade.
7.Intermittent operating for the tool, suggest that loosen the switch
for a second after 30 seconds’ working