3M 300LSE Double-sided Super Sticky Heavy Duty Adhesive Tape Cell Phone Repair

Description

3M 300LSE Double-sided Super Sticky Heavy Duty Adhesive Tape Cell Phone Repair
3M Double-Sided Adhesive Tape Strong Pads Mounting Stickers No More Nails Strip
3.57 USD
Free shipping
3M 300LSE Heavy Duty Waterproof Double-Sided Adhesive Strong Tape Sticky 2~6mm
2.27 USD
Free shipping
4 sheet 3M 300LSE Sticky Double Sided Clear Tape Pads Mounting Adhesive 10~50mm
3.47 USD
Free shipping
1pk Black Sponge Adhesive Single-Side Square Round Patch Pad Circle Foam Tape
3.27 USD
Free shipping
3M 300LSE Strong Sticky Double-Sided Adhesive Transparent Square Sheet Tape
3.30 USD
Free shipping
3M 300LSE Super Sticky Double Side Heavy Duty Adhesive Tape Cell Phone Repair
2.68 USD
Free shipping
5/8 Sheet 3M 300LSE 4"x8" Double Sided Super Sticky Heavy Duty Adhesive Tape
3.86 USD
Free shipping
5/10 sheet of 3M Double-Sided Adhesive Tape Strong Pads Mounting Stickers Strip
8.78 USD
Applications:
Battery Bonding, Battery Door Attachment, Bezel Bonding, Camera Module Assembly, Case Assembly, Cover Lens Bonding, Display Bonding, Electrical Insulation Bonding, Electronic Component Bonding, Logo Bonding, Low Surface Energy Bonding, Memory Card Bonding, Module Bonding to PET Card, Rubber Feet Bonding, Speaker Module Assembly, Touch Panel Bonding, Touchpad Assembly, Touchpad Bracket Assembly
Application Techniques:
Bond strength is dependent upon the amount of adhesive-to-surface contact developed. Firm application pressure and moderate heat, from 100°F (38°C) to 130°F (54°C), will assist the adhesive in developing intimate contact with the bonding surface. To obtain optimum adhesion, the bonding surfaces must be clean, dry and well unified. Some typical surface cleaning solvents are isopropyl alcohol or heptane.* Ideal tape application temperature range is 70°F to 100°F (21°C to 38°C). Initial tape application to surfaces at temperatures below 50°F (10°C) is not recommended because the adhesive becomes too firm to adhere readily. However, once properly applied, low temperature holding is generally satisfactory.
Environmental Performance:
Humidity Resistance:
High humidity has minimal effect on adhesive performance. No significant reduction in bond strength is observed after exposure for seven days at 90°F (32°C) and 90% relative humidity.
UV Resistance: When properly applied, nameplates and decorative trim parts are not adversely affected by exposure to direct sunlight.
Water Resistance:
Immersion in water has no appreciable effect on the bond strength. After 100 hours at room temperature, the high bond strength is maintained.
Temperature Cycling Resistance:
High bond strength is maintained after cycling four times through: 4 hours at 158°F (70°C) 4 hours at -20°F (-29°C) 4 hours at 73°F (22°C)
Chemical Resistance:
When properly applied, nameplate and decorative trim parts will hold securely after exposure to numerous chemicals including oil, mild acids and alkalis.
Specifications:
Color:
Transparent
Operating Temperature Range (Celsius): 93 - 149 Degrees C
Total Length: 55 meter
Total Tape Thickness without Liner: 0.17 mm (6.7 mil)
Substrates: Glass, HSE Plastics, LSE Plastics, Metals
Package include:
1 piece 3M double-side sticker
Mention:
Please confirm your address is correct when you making purchase.
Brazil customers please provide your
Tax number for more effectively custom clearance:
•CPF format: 000.000.000-00
•CNPJ format: 00-000.000/0000-00