-40%

F&F CURRENT TRANSFORMER 40 / 5A 1VA TI-40-5 / # L AR8 1105

$ 19.3

Availability: 26 in stock
  • Brand: Unknown
  • Model: Unknown
  • Condition: New
  • Type: TRANSFORMER

    Description

    Welcome to the Patkor store auction
    In this auction we offer:
    Price for 1 piece!!!
    F&F, Current transformer 40 / 5A 1VA TI-40-5
    Product code:
    TI-40-5
    Type:
    single phase
    Construction:
    with closed core
    Lp / ls ratio:
    40/5
    Class:
    1
    Power [VA]:
    1 VA
    Frequency:
    50 ÷ 60 Hz
    Maximum working voltage:
    0.66 kV AC
    Standard number:
    IEC 60044-1
    Nominal secondary current Is:
    5 A.
    Insulation breakdown voltage:
    3 kV / 1 min.
    Hole dimensions P1 / P2:
    Ø22 mm
    Libra:
    0.135 kg
    Security factor:
    FS ˂ 5
    Dimensions WxH [mm]:
    87.5 mm x 104 mm
    Connection S1 / S2:
    4 mm² screw terminals
    Tightening torque:
    0.5 Nm
    Working temperature:
    -5 ÷ 40 ° C
    Mounting position:
    vertical / horizontal
    Installation:
    board / track
    Level of security:
    IP20
    Product description
    Single-phase current transformer
    with closed core
    40/5 gear.
    Power 1 VA.
    Current transformer
    is used to proportional change of high currents to lower values, adapted to  measuring ranges of control and measuring devices.
    Action
    The conductor with the measured current passes through the main hole of the transformer (P1 / P2), which is equivalent to one turn of the primary winding. The S1 and S2 terminals of the secondary winding are connected to the terminals of the measuring circuit of the control or measuring device.
    The ratio of the intensity of the currents in both windings is a constant value and is called the current ratio: IPn / ISn = N, where IPn - rated primary current; ISn - rated secondary current; N - gear value. The current value can be determined from the value of the current flowing through the secondary winding  flowing through the primary winding: ISm * N = IPm, where ISm - measured primary current; IPm - secondary measured current.
    Attention!
    It is recommended to connect the secondary circuit with a wire with a diameter of not less than 2.5 mm².
    Recommended grounding of S2 terminal.
    It is forbidden to disconnect the secondary circuit during the transformer operation (possibility of high voltage resulting in electric shock  people or damage to the device).
    COMPARISION TABLE
    Attention!
    Only applies to the TI-30
    * For the correct operation of the transformer, it is required to pass the current cable through the transformer hole 4 times.
    Due to eBay selling limits
    we do not show the full stock quantity in our offers.
    Do you want to buy more pieces?
    Write to us .
    We will prepare an individual offer on eBay with one shipping cost.
    Important information!
    Please make sure you read the following to avoid any confusion when purchasing and shipping.
    Invoice
    We issue invoices
    (Information for companies registered in the European Union with a VAT eu number, we issue a VAT invoice 0% the price at the auction does not include VAT)
    Shipment
    We ship from Poland. We ship all over the world.
    We offer standard shipping on this listing. If express delivery is required - write to us.
    If you want a cheaper shipment - write to us.
    If your country is not on the shipping list - write to us and we will quote the shipping for you.
    Due to the international transaction, the parcel arrival time depends on the weather conditions, pandemic, customs policy, public holidays etc.
    If you have any other questions - write to us.
    Returns
    We accept returns as per ebay's terms and conditions.
    If you are not satisfied with the product - write to us.
    WELCOME TO OUR OTHER AUCTIONS