Fluke 1552A-12 Intrinsically Safe Stik Thermometer, 12", -112 to 572°F

Description

Untitled Document
Fluke 1552A-12 Intrinsically Safe Stik Thermometer, 12", -112 to 572°F
Model:
1552A-12
| Order No:
1552A-12
An intrinsically-safe, and battery-operated 12" stick reference thermometer designed to go where you work, whether outdoors in environments where potentially explosive gases may be present or on the floor of a processing plant. Features a large backlit LCD that rotates up to 90°, and measures from -112 to 572°F (-80 to 300°C).
Brand:
Fluke
Model:
1552A-12
Order No:
1552A-12
Condition:
NEW
Description
Fluke 1552A-12 Intrinsically Safe Stik Thermometer, 12", -112 to 572°F
The "Stik" thermometer delivers repeatable temperature measurements accurate to ±0.09°F (±0.05°C) over its full range. Whether you work outdoors in environments where potentially explosive gases may be present or on the floor of a processing plant, the intrinsically-safe, battery-operated, portable reference thermometer is designed to go where you work. It's a great choice for daily checks of working thermometers, custody transfer temperature determination, PET calibration, LIG calibration, and temperature transmitter calibration and verification.
The stainless steel probe and digital readout are fixed together and calibrated as a system. The large backlit LCD rotates 90° degrees making it easy to read from any angle, and a user-configurable stability/trend indicator lets you know when your temperature is stable enough to record an accurate measurement. A user-settable auto-off function extends typical battery life to up to 300 hours, and the low-battery indicator and stop-measure function prevent erroneous measurements from being made due to a low battery. Plus you can easily and accurately calibrate it with a simple three-point calibration function.
Features
Intrinsically-safe, battery operated, portable reference thermometer
Provides accuracy of ±0.09°F (±0.05°C) over full range
Features intrinsically-safe operation (ATEX and IECEx compliant)
Measures -112 to 572°F (-80 to 300°C)
Provides user-configurable temperature with Trend/Stability indicator
Displays temperature in °C or °F
Delivers 300-hour battery life
Shows percent battery-life and low-battery indicators
Measures and sources pressure using any of Fluke 700Pxx Pressure Modules (sold separately)
Allows you to creates and run automated as-found/as-left procedures to satisfy quality programs or regulations, and record and document results
Holds up to a full week of downloaded procedures and calibration results
Offers many flexible features like autostep, custom units, user-entered values during test, one-point and two-point switch testing, square root DP flow testing, programmable measurement delay and more
Offers compatibility with DPCTrack2 and many other asset management software packages (sold separately)
Bright white dual display for reading both sourced and measured parameters simultaneously
Easy-to-use multi-lingual interface
Gas gauge and rechargeable Li-Ion battery for 10 hour uninterrupted use
Included
Thermometer
NVLAP-Accredited Report of Calibration
Fixed PRT
3 x AAA Batteries
User's Guide on CD-ROM
Specifications
Temperature Range
-112 to 572°F (-80 to 300°C)
Accuracy (1 Year)
±0.09°F (±0.05°C)
Temperature Resolution
Selectable: 0.1, 0.01, 0.001 (default 0.01)
Sample Rate
Selectable: 0.5 seconds, 1 seconds, 2 seconds (default 1 second)
Readout Temperature Coefficient
Add ±10 ppm/°C of full scale temperature from 14 to 64°F (−10 to 18°C) and 82 to 122°F (28 to 50°C)
Probe Temperature Coefficient
0.00385 &ohm/&ohm/°C Nominal
Nominal Probe Resistance at 0°C
100 &ohm
Probe Hysteresis
±0.01°C
Response time
Approximately 20 seconds
Operating Temperature Range Readout
14 to 122°F (-10 to 50°C)
Storage Temperature
-4 to 140°F (-20 to 60°C)
0 to 95% RH, non-Condensing
Display Units
°C, °F
Sensor
Type: 100 &ohm wire-wound PRT
Length: ≤1.2" (30 mm)
Position (from sheath tip): 0.1" (3 mm)
Minimum Immersion Depth
Wet medium (liquid bath, thermowell with thermal compound) 2.8" (70 mm)
Dry medium (dry-well, thermowell without thermal compound) 4.8" (120 mm)
Maximum Immersion Depth
3" (75 mm) less than the total length. Make sure the last 75 mm of probe, nearest to the internal electronics of the device, are not put into the heat source
Probe Sheath Material
Stainless steel
Logging Intervals
2 seconds, 5 seconds, 10 seconds, 30 seconds, or 60 seconds
Damping
Moving average of the most recent 2 to 10 readings (ON/OFF, 2, 5, 10)
Communications
RS-232 stereo jack (access calibration parameters only)
DC Power
3 x AAA alkaline batteries
Battery Life
Approximately 300 hours (12.5 days) of continuous operation with the backlight off
Battery Save (Auto-Off) Range
Selectable from 1 to 30 minutes or can be disabled
Safety
IEC 60079-0, IEC 60079-11: Ex ib IIB T4 Gb; IEC 61010-1: Pollution Degree 2
Electromagnetic Compatibility
International: IEC 61326-1: Portable Equipment; IEC 61326-2-2; CISPR 11: Group 1, Class B
USA (FCC): 47 CFR 15 subpart B. This product is considered an exempt device per clause 15.103
Dimensions
5 x 2.5 x 1.4" (125 x 62 x 35 mm)
Probe Size
¼ x 12" (6.35 x 305 mm)
Weight
6.9 oz (200 g)
Terms & Conditions
Item Condition:
Unless specified otherwise all products listed are Brand New in the original factory packaging and include a full factory warranty.
Shipping:
We currently only ship to U.S. buyers. We ship items within one or two business days from payment. We do not process shipments on weekends and holidays. Local pick up is not available. We only ship to addresses verifiable by either PayPal or credit card issuing bank.
Please note that we cannot alter the address once a purchase is made. In the case of PayPal payment, we will ship orders when the payment is marked “Eligible” for PayPal Seller’s protection.
*Shipping Rates are for Continental US, Please Contact us for other US Destinations
Payment:
Currently all payments must be made directly though PayPal
Sales Tax:
We are required to charge sales tax in North Carolina
Return Policy:
If for any reason you are not 100% satisfied with a product you receive from us, you may return the regular stock product within 30 days from the time of receipt, for a full refund or exchange of the product you purchased (less any shipping costs). Within this time, products may be returned; freight prepaid and must be in their original packaging and in resalable condition.
Shipping errors, missing items or damages must be reported to us immediately (damages should be accompanied by a signed bill of lading acknowledging the damage). Items returned will be inspected for damage or misuse at which time they may be subject to restocking fees, other fees or refused, prior to the issuance of any credit.