Goulds JRS7 3/4HP Shallow Water Well Jet Pump 115/230V, Single Phase

Description

Goulds JRS7 Shallow Water Well Jet Pump, 3/4 HP, Single Phase, 115/230 V
This shallow well jet pump comes with built-in jet assembly, which eliminates the need for a separate shallow well adapter, for maximum lift of 25 feet. It has a back pullout design that allows disassembly of pump for service without disturbing piping.
Pump is used but works great, does not have a lot of hours on it. Was used for 1 season/1 year use or less.
This is a quality pump you wont be
disappointed...
don't
buy one of them off name cheap ones
believe
you me.
The pressure gauge is a little jacked up but its just the reading back plate, looks like it could just be straightened out really. I sowed a picture of this in the last picture and these are very cheap to replace if you need it.
Comes as shown in pictures....I may need to dis-connect the copper pipe for shipping purposes.
Get a good deal here instead of spending 4 to 5 hundred on a new one.
Will ship fast, very next business day shipping.
Thank you.
After initial priming the pump has the ability to re-prime itself even when air gets into the system. Pumping resumes once the water level rises above the foot valve
Features
1-1/4" NPT suction and 1" NPT discharge
Pressure switch preset at 30-50 PSI
Two compartment motor for easy access to motor wiring and replaceable components
Nozzle clean out plug in pump case
Corrosion resistant, engineered plastic tubing and fittings are easily removed for cleaning
Premium O-ring design fittings need only be hand tight to seal
O-ring casing seal
Drain plug for ease of winterizing and maintenance
Seal housing is engineered composite, corrosion and abrasion resistant
Impeller is corrosion and abrasion resistant, F.D.A. compliant, glass filled Noryl
Diffuser (Guidevane) is F.D.A. compliant, injection molded, food grade, glass filled Lexan for durability and abrasion resistance
Tubing and fittings are F.D.A. compliant engineered plastic is corrosion and U.V. resistant
Motor can be operated continuously without damage
Built-in overload with automatic reset
Electro-coat paint process is applied inside and out, then baked on for corrosion resistance
After initial priming the pump has the ability to re-prime itself even when air gets into the system. Pumping resumes once the water level rises above the foot valve