Hydraulic Backhoe Directional Control Valve w/ 2 Joysticks, 6 Spool, 11 GPM

Description

Monoblock Hydraulic Directional Control Valve w/ 2 Joysticks, 6 Spool, 11 GPM
This monoblock valve is a hydraulic directional control valve. These valves are used to start and stop fluid flow into hydraulic cylinders or hydraulic motors.
Common Uses:
Operate hydraulic cylinders (Double-Acting or Single-Acting)
Operate hydraulic motors ("D" Spool Required)
Install rear remotes on a tractor
Benefits:
Good Online Partner
Hydraulic Backhoe Directional Control Valve w/ 2 Joysticks, 6 Spool, 11 GPM
Monoblock Hydraulic Directional Control Valve w/ 2 Joysticks, 6 Spool, 11 GPM
This monoblock valve is a hydraulic directional control valve. These valves are used to start and stop fluid flow into hydraulic cylinders or hydraulic motors.
Common Uses:
Operate hydraulic cylinders (Double-Acting or Single-Acting)
Operate hydraulic motors ("D" Spool Required)
Install rear remotes on a tractor
Benefits:
6 Spool valve with compact design allows for installations in tight areas
All spools are standard double acting with spring return to neutral position which are ideal for double acting cylinders
Used for open center systems (Pump to Tank Flow) - closed center option available
Anti-drop load checks on each spool
Precision ground and hard chrome-plated spools assure a long life
High-tensile strength cast iron monoblock construction
SAE O-Ring ports ensure solid seal and prevent blockages
Capable of Closed Center or Power Beyond (conversion plug required)
Vertical or horizontal handle mount
Adjustable Relief Valve Range:  1500 to 3625 PSI
Used as motor or single-acting spool possible (#8 SAE port plug required)
Features:
Max Operating Pressure: P = 3625 PSI, T = 725 PSI, A & B = 4350 PSI
Flow Rating: 11 GPM (40 l/min)
A & B Work Ports:  #8 SAE O-Ring (3/4”-16) Thread
Inlet Port: #10 SAE O-Ring (7/8”-14) Thread
Outlet Port: #10 SAE O-Ring (7/8”-14) Thread
2 – 5/16” Mounting Holes
Item Specifics
Brand
ALL-CARB
MPN
Does Not Apply
Warranty
1 year
Maximum Pressure
3625 PSI
Valve Operation
Manual
Spool Count
6 Spool
Maximum Flow Rate
11 GPM
Surface Finish
Standard
Modified Item
No
Modification Description
No
Type
Hydraulic controller
Payment
We accept Paypal only.
Shipping
Please contact us if you have special requirements (combination of packaging etc.).
Returns
Change-of-mind return can only be accepted within 8 days after purchase. All other returns can be accepted in 30days.
We will closely examine the condition of the returned items and will not issue any refund/exchange before we make sure the items are in their original neat conditions.
Contact Us
We do our best to resolve any issue. Leaving negative feedbacks and low ratings doesn't get things solved. So please talk with us and we will not let you down.
Good Online Partner
DESCRIPTION
PAYMENT
SHIPPING
RETURN POLICY
CONTACT US
Shop Category
Store Home
Lighting & Lamps
◈  Light Interior Package
◈  Tail Light Assembly
◈  Fog Lights
◈  LED Lamp Decoder
◈  Headlight Assembly
◈  Fog lamp assembly
◈  Turn Lights
◈  Fog Lamps cover
◈  Moto Lighting & Lamps
Carburetor
◈  Auto Carburetor
◈   Rebuild Kit
◈  Motorcycle Carbureto
◈  ATV & UTV Carburetor
Valves
◈  Control Valve
Brakes & Brake Parts
◈  Brake Master Cylinder
◈  The Clutch
◈  Others
Auto Repair Kit
◈   Body repair kit
◈  Automobile engine repair kit
◈   Door hinge repair kit
◈  Injector repair kit
◈  Skylight repair kit
◈  Turbine Repair Kit
◈  Tining Pin Suit
Auto Engine System
◈  Valve Cover & Gasket
◈  Oil Cooler
◈  Engine Timing Cover
◈  Machine Oil Can
◈  Filter Housing &Accessories
◈  Engine Hood
◈  Others
◈  Camshaft
◈  Tensioner
◈  Timing gear
◈  Oil pan
◈  Engine guard
◈  Engine mount
Auto Ignition System
◈  coil&high voltage wire
◈  Ignition Switch
◈  Car Ignition Module
◈  Others
Auto Actuator
◈  Door Lock Actuator
Auto Inlet & Outlet System
◈  Air Filter
◈  Intake Exhaust Valves
◈  Exhaust And Intake Pipes
◈  Others
Auto Circuit Wiring Harness
◈  ECU wire & assembly
◈  car body wiring harness
◈  Car airbag hairspring
Transmission System
◈  Chain
◈  Shaft
◈  Belt
◈  Others
Auto Interior
◈  Trunk Shield
◈  Others
Exterior Trimming Parts
◈  Roof Rack
◈  Running Boards/Side Steps
◈  Bumper Grille
◈  Fender Flares
◈  Windshield Wiper Blades
◈  Window Visors/Rain Guard
◈  Front Bumper Grille Guard
◈  Door Handle
◈  Hinge
◈  Front Bumper
◈  Rear Bumper
◈  Others
◈  Front & Rear Lip
◈  Car Side Mirror
◈  Rear Trunk Spoiler Wing
◈  Trailer Hook Cover
◈  Body Trim
◈  Auto Body Trim Panel
Pumps
◈  Auto Fuel Pump
◈  Auto Water Pump
◈  Air Secondary/Air Smog Pump
◈  Power Steering Pump
◈  Windshield Washer Pump
◈  Others
Air Conditioning & Heat
◈  A/C Compressor & Clutch
Suspension & Steering
◈  Control Arm Bushing
◈  Shock Absorber
◈  Stabilizer Bar
◈  Control Arm Ball Joint
◈  Control Arm Kit
◈  Suspension Beam
◈  Automobile Chassis Lifting Kit
◈  Power Steering Oil Pipe
◈  Steering Shaft
◈  Steering Rod
◈  Steering Knuckle
◈  Steering Machine
Automotive tools
◈  Pickup Toolbox
◈  Chassis service tools
◈  Tire tool
◈  Injector repair tools
◈  General tools for maintenance
◈  Engine maintenance tools
◈  Timing tool
◈  On board tools
Fuel Systems
◈  Hose,Lines&Fittings
◈  Fuel tank filler pipe
◈  Fuel injector
Special vehicle
◈  Others
◈  Golf car accessories
◈  Karting accessories
◈  Yacht Accessory
◈  Excavator accessories
Business & Industrial
◈  Industrial Control Module
◈  CNC
◈  Machine Tools&Tooling
◈  Generator Parts
◈  Other
Lawn Mowers
◈  Carburetor
◈  Ignition Coil
◈  Recoil Starter
◈  Gaskets Kit
◈  Air Filter
◈  Spindle
MOTO Inlet & Outlet System
Motorcycle Decoration
Motorcycle Ignition System
◈  Motorcycle Ignition
◈  Motorcycle Ignition Coil
◈  Motorcycle Fuel Switch
◈  Motorcycle Hand Plate
◈  Motorcycle Ignition Switch
◈  Motorcycle Starter Fitting
Motorcycle engine system
◈  Piston Cylinder Fittings
◈  Camshaft
◈  Gasket Kit
◈  Starter
◈  Others
Motorcycle Control System
◈  Rectifier
◈  Relay
◈  Voltage Regulator
◈  Others
Motorcycle Pump
◈  Motorcycle Fuel Pump
◈  Motorcycle Brake Calipers
Other
Hot Item
Bladsharr In Line Fuel Gas Filter Shut Cut Off Valve Clamp 3Kit 1/4"
USD 8.47
796587 Carburetor For Briggs and Stratton 795486, 794136, 591736,594601 796250
USD 20.02
Morse taper drill chuck arbor MT2 3/8"-24UNF
USD 7.15
799109 CARBURETOR For BRIGGS STRATTON V-TWIN ENGINE 27HP 44Q977 JOHN DEERE MOWER
USD 29.81
Carb 951-14026A 951-14027A 951-10638A For MTD Troy Bilt Cub Cadet Yard 170-SU
USD 14.02
New List Item
10 Ton Hydraulic Wire Battery Cable Lug Terminal Crimper Crimping Tool w/ Case
USD 40.80
50 Pcs 2" Medium Surface Conditioning Discs Roll Lock Die Grinder Sanding Pads
USD 19.86
E7018 5/32" Stick electrodes welding rod 50 lbs (10 lbs x 5 Pack)
USD 140.06
Carburetor For Subaru Robin EX30 279-62364-20 For RGX4800 RGN5100 Engine
USD 17.00
1/8"×14" E7018 Premium Arc Welding Rods Carbon Steel Electrode 10 lb Box US
USD 27.86
Excellent Delivery
Hydraulic Backhoe Directional Control Valve w/ 2 Joysticks, 6 Spool, 11 GPM
Monoblock Hydraulic Directional Control Valve w/ 2 Joysticks, 6 Spool, 11 GPM
This monoblock valve is a hydraulic directional control valve. These valves are used to start and stop fluid flow into hydraulic cylinders or hydraulic motors.
Common Uses:
Operate hydraulic cylinders (Double-Acting or Single-Acting)
Operate hydraulic motors ("D" Spool Required)
Install rear remotes on a tractor
Benefits:
6 Spool valve with compact design allows for installations in tight areas
All spools are standard double acting with spring return to neutral position which are ideal for double acting cylinders
Used for open center systems (Pump to Tank Flow) - closed center option available
Anti-drop load checks on each spool
Precision ground and hard chrome-plated spools assure a long life
High-tensile strength cast iron monoblock construction
SAE O-Ring ports ensure solid seal and prevent blockages
Capable of Closed Center or Power Beyond (conversion plug required)
Vertical or horizontal handle mount
Adjustable Relief Valve Range:  1500 to 3625 PSI
Used as motor or single-acting spool possible (#8 SAE port plug required)
Features:
Max Operating Pressure: P = 3625 PSI, T = 725 PSI, A & B = 4350 PSI
Flow Rating: 11 GPM (40 l/min)
A & B Work Ports:  #8 SAE O-Ring (3/4”-16) Thread
Inlet Port: #10 SAE O-Ring (7/8”-14) Thread
Outlet Port: #10 SAE O-Ring (7/8”-14) Thread
2 – 5/16” Mounting Holes
Payment
We accept Paypal only.
Shipping
Please contact us if you have special requirements (combination of packaging etc.).
Returns
Change-of-mind return can only be accepted within 8 days after purchase. All other returns can be accepted in 30days.
We will closely examine the condition of the returned items and will not issue any refund/exchange before we make sure the items are in their original neat conditions.
Contact Us
We do our best to resolve any issue. Leaving negative feedbacks and low ratings doesn't get things solved. So please talk with us and we will not let you down.
All rights reserved.