RainBro 1/2 HP Cast Iron Convertible jet well pump with Ejector Kit CCW050

Description

RainBro 1/2 HP Cast Iron Convertible jet well pump with Ejector Kit CCW050.
High Capacity Pumping
The RainBro CCW050 1/2 horsepower cast iron convertible deep well pump is designed for wells up to 80 feet deep. It can be used as shallow well jet pump where depth of the well is 25 ft. (shallow well max depth 25 ft.) and deep well jet pump where depth of well is 26-80 ft. (deep well max depth 80 ft.). At 40 psi it pumps up to 310 US gph@ 5 ft.. This heavy-duty well pump is designed with a 115/230-volt motor, factory set for 230V with the quick change voltage selection switch, and the pressure switch is set to 30 psi on for high-pressure delivery, produces up to 50 psi with automatic shut-off.
Wide Application
Jet Pumps are mounted above ground and lift the water out of the ground through a suction pipe. RainBro well pumps are used for supplying fresh water to large homes, farms, and cabins.
What'sin the Box
1/2HP convertible well pump
Ejector kits
User Manual
WARNING
Do not run the pump before priming it,Remove the priming port and pour clean water into the unit until casing and suction line are completely filled.
This jet Pumps are NOT submersible and are usually placed inside a protected area outside a well.
DetailsDetails
Brand RainBro
Color Black
Material Cast Iron
Power Source Ac/dc
Maximum Flow Rate 5.16 Gallons Per Minute
About this item
GREAT PERFORMANCE – 1/2 hp, max. flow rate is 310 gallons per hour @ 40 psi, 1-1/4 in. suction and 1 in. discharge and drive ports.
AUTOMATIC OPERATION - Pressure switch is pre-set at 30-50 psi for automatic operation.
DUAL VOLTAGE - 115V/230V motor, factory set for 230V with the quick change voltage selection switch inside motor cover box.
DURABLE - Rugged cast iron pump body for durability and dedicated priming port for volute filling, and includes ejector kit.