-40%
Reversed Pressure Switch,use for solar project or when closed contact is needed
$ 25.87
- Description
- Size Guide
Description
Nass Reversed Pressure Switch SeriesReliable control for automatic water systems where a closed contact is needed when at pressure.
The switch is universally acceptable for use WHEN CLOSED CONTACT IS REQUIRED WHEN AT PRESSURE. (CALLED RVERSED PRESSURE CONTROL)
Mostly used on all solar pump controllers and can be used for any requirement when closed contact is needed when at pressure.
Specifications
·
Corrosion Resistant and Non-Metallic Cover
·
No Wire Looping
·
Straight Thru Wiring, With Rubber Seal
·
Visible Contacts 2 Pole Double Break, CLOSED WHEN AT PRESSURE
·
No Drift Pressure Settings
·
Captive Cover Screw
·
Ample Wiring Room
·
Ground Screws
·
Easy to Adjust.
·
Complete Plastic Housing
MODEL
Min ON (Cut-In)PSI
Max Off
(Cut-Out) PSI
Differential
PSI
Factory Setting
PSI
Electrical Rating
Pipe Fittings
Contact Arrangement
120VAC
240VAC
Nass
15
60
40-20
20-35
20A
12A
1/4" Male or Female NPT
N0
Conversion: 1Kgf/cm2 = 14.2PSI , 1bar = 14.5PSI
Approval: UL, CUL, CSA, TUV CE