Sim-ply-trol 0-2000 deg meter with thermocouple, works needs calibration

Description

estate item.  From the estate of an elderly friend who collected a lot of stuff - this was near a fire that burned a lot of his machine tools about a decade ago, and it was part of an old temperature controller that covered with the dried foam fire retardant - I was sure it was dead and the controller itself was not repairable (for any reasonable effort), I cleaned up the meter and connected the thermocouple directly. When I heated the junction of the thermocouple, the meter responds properly, so you just need to set the zero point. The meter is mounted to a bracket that was part of the original (discarded) controller. you get exactly what is shown in the photos.  I removed the control contact mechanism, it was interfering with the meter movement and had partly melted from the heat of the fire.  So, you get a mirrored display that needs to be re-zeroed and a thermocouple (and a steel mounting bracket).
I normally ship within 24 hours of your order, but the post office does not always initiate tracking when I put the packages in the drop off box.
Check out my
other items
!