V0 Stainless Steel Self Priming Jet Water Pump Industrial Chemical Pump 750W

Description

Product upgradation!!!
1. The new motor can work continuously and is suitable for the occasions requiring long working hours.
2. The previous motor is only allowed to be used within 70-80℃, while the new motor can withstand 103℃.
3. The new machine spindle adopts more high-quality material, 316 stainless steel.
4. The upgraded machine is more corrosion resistant.
Can be used to transport liquid not more than 103℃, which containing small soft particle or fiber,
corrosive or have health requirements.
It is widely used in food, beverage, pharmaceutical, sewage treatment, chemical, electroplating,
bleaching, fine chemical and other industries use.
Voltage: 110V
Power: 750W
Flow rate: 333L/min
Lift: 25m
NPSH: 2m
Inlet: 40mm
Outlet: 40mm
Type: Corrosion resistance, sewage pump, trash pump
Pump header material: 316 Stainless steel
Motor: Copper wire
Pump spindle: Horizontal
Impeller type: Semien closed impeller
Impeller suction: Single
Mechanical Seal: tetrafluoroethylene/graphite/ceramics
Weight: 24kg
First, preparation for starting
1. Check card machine blades, impeller, if the rotation is flexible.
2. Open the inlet valve, outlet valve, micro drive unscrew upper pump body water plug, fill the
pump with water and eliminate the air inside pump, tightening water plug after air tight.
3. Dish with the hand pump, let the lubricant into the mechanical seal face.
4. Inching the motor, confirm the motor rotation direction is correct.
Second, startup and operation
1. Press the motor start button, then start self-priming pump.
2. Check whether the outlet pressure rise, when the outlet pressure rose and stable in a certain
range of reading, open the outlet valve gradually, adjust the pressure and the speed of water.
3. Check the bearing temperature (temperature ≤ 75 ℃), check whether pump body mechanical seal is leakage;When it is big leakage or abnormal,  should stop the pump.
Third, stop operation
1. Close the outlet valve gradually, press the pump power button.
2. Close the valve imports.
Fourth, attentions
1. Such as environmental temperature is lower than 0 ℃, should drainage the pump, in case of
pump be frost crack.
2. The pump can not be long-term operation when the air did not exhaust at all.
3. When it is found mechanical wear , or the noise and vibration increase in the operation, should
stop working to check and troubleshooting.
Package included:
1 x Chemical Pump