-40%

-SUPER STRONG- GENUINE 3M 300LSE DOUBLE SIDED ADHESIVE 4X8 SHEET *FAST SHIP*

$ 1.53

Availability: 44 in stock
  • Condition: New
  • Type: Double Sided Adhesive
  • Formulation: Adhesive
  • Custom Bundle: No
  • Format: Sheet
  • Features: Double Sided
  • All returns accepted: ReturnsNotAccepted
  • Non-Domestic Product: No
  • Modified Item: No
  • Size: 4X8 Inches
  • MPN: 300LSE
  • Brand: 3M

    Description

    There is in fact a slight learning-curve to using this adhesive, if you have any troubles PLEASE contact me. I'm always here to help.
    There is a reason why 3M adhesive is used in many of the products and electronics that we all use, every day---because it WORKS!
    This listing is for ***(1) 4"X8" sheet***
    Adhesive is very thin BUT has a super strong bond. 3M states that the thickness of this adhesive is 2 mils, which translates to about 2/1000 of an inch. So PLEASE make sure that this is the right product for your project before you make your purchase.
    This double-sided adhesive works best on smooth surfaces, although, it still may work on some rough surfaces.
    This sheet measures at 4 inches wide by 8 inches long.
    This sheet can be trimmed to fit your application.
    *********BRAND NEW**********
    This adhesive itself is transparent.
    The brown paper that you are seeing in the photos is one side of the paper backing which you'll need to remove to reveal the adhesive, the opposite side has a plain brown paper without the green logos.
    Note to USA customers: The FREE shipping option will be sent in an envelope with a 55¢ stamp. If you want tracking on your order please choose the .71 "1st Class Package" option during checkout!
    Any questions? Please ask before buying.
    INSTALLATION INSTRUCTIONS & TIPS:
    We do not accept returns on this adhesive so if you are not sure if it will work with your project PLEASE ask any and all questions BEFORE PURCHASE!
    The process is VERY SIMPLE but if you need help, please ask before attempting to use it. I am here to help, just contact me!
    Clean both surfaces which you plan on sticking together, use a clean cloth with some rubbing alcohol. If the surfaces are cold you may want to warm them with a hair dryer.
    Peel away the brown paper backing this is the side that DOES NOT have the green 3M logos, stick the adhesive to one of the surfaces. You can use a razor knife to start peeling this first brown paper layer.
    At this point you should have one piece of your repair with the adhesive stuck to it, the brown paper with the green 3M logos is still in place. Now you can peel away the brown paper side with green 3M logos on it. You will now have one of your two surfaces with the transparent adhesive revealed, and both brown papers removed. You can throw away both pieces of brown paper.
    Affix the repair surface with the adhesive to the repair surface that does not have the adhesive. This stuff is VERY STICKY so more-than-likely, you will have one chance to get it right. Press the two parts together, any adhesive that hangs out of the sides because it was too big will come off easily, just rub it with your finger and it will ball up. You're all done, enjoy!
    ~IMPORTANT~
    If you have any questions or concerns about installation, PLEASE contact me, I am here to help assist you with your project. So please feel free to contact me if needed.